1/24 - 1/18 RC 2 level Crawler Course For Sale
I designed and built this 2 level course. The course easily dissembles in sections for easy moving. The frames are assembled with bolts and in wood T-nuts.
The bottom level is 10ft long by 4ft wide. The top level is 8ft long by 4ft wide. There are three ways to move between levels. There is a stairway, log obstacles ramp and a curved ramp with a side slant of 30 degrees.
Included are 2 Redcat Ascent-18 RC Crawler - 1:18 Brushed Electric Rock Crawler with MEUS Racing Brass Steering Knuckles+Front Axle Weights added, controllers and 750 mah 2S LIPO battery pack w/ JST connector. Included is a Bat-Safe for safely charging LIPO batteries and a Hitec charger.
The top level consist of:
44 inch long log suspension bridge.
48 inch by 36 inch 3D printed rock area,
Stone arch bridge in rock area that you can go over an thru.
20 inch tall mountain with 2 different trails.
Air soft pellet bog.
Different stepped trails with boulders, obstacles toxic barrels.
7 inch tall hill obstacle, on one side of bridge.
The lower level consist of:
A 5ft long raised 5 obstacle course.
40 inch long teeter-totter with rock bed obstacle.
Tunnel that leads to the log obstacles ramp.
Long air soft pellet bog with alligators.
Obstacle to get on and off the curved ramp a 2nd way.
A precision driving obstacle that there is no room for on the track, but will be included with this track package.
Texaco gas station w/ pump that you can drive into for repairs or gas.
Old Texaco tow truck.
Miscellaneous skids and barrels on the side of the gas station.
4 of the lower obstacles can be removed and put on the floor or taken outside to maneuver thru if you so choose.
Lights in the video are not included in the sale of this track.
$3,000.00
A 4 minute video of the track is on You Tube, the link is
https://www.youtube.com/watch?v=AnGD4padQO4
Posted in:
Everything Else.
0 people are following this item.
Find out how close you are to this item!